How good are your hydronic system diagnostic skills? Can you spot errors while the design is still conceptual and change the layout to prevent problems? How about uncovering errors after the hardware is installed? Can you come up with a “minimally-invasive” approach to right the wrongs?
On May 20 at noon CDT, a favorite to the Coffee with Caleffi series, John Siegenthaler, PE, will present several problematic hydronic system scenarios and show you what’s wrong based on the fundamentals during this extended edition of the webinar. He will also describe how to fix these problems at the design stage and, if necessary, after the installation fails to deliver its expected performance in this extended edition of the webinar series.
- If the supply tees for several secondary circuits can all be grouped together along the primary loop
- When or if it is necessary to use a hydraulic separator in systems that have a buffer tank
- If a 1-inch thermostatic mixing valve can be used to supply a manifold station that requires a 9-gpm flow rate
- If a boiler bypass pipe with its own circulator can protect a boiler from sustained flue gas condensation
A seasoned industry leader and passionate teacher, John shares his more than 40 years of experience in the understanding and proper application of water-based engineering principles with the audience. He is the Principal of Appropriate Designs and a regular contributor to industry publications.
Coffee with Caleffi technical training webinars are free and intended for contractors, designers, and wholesalers. By submitting your webinar registration, you are consenting to email communications to keep you up-to-date on industry news.
A Certificate of Attendance is emailed to attendees following the webinar equivalent to 1.0 PDH for continuing education.
You can register at Caleffi’s website.
Caleffi’s webinar archive is available 24/7 for your convenience. If you have questions on webinar content, contact [email protected].